Before You Start
Before assembling your Guac Booth, make sure to have:
- Updated to the latest version of iPadOS
- Updated to the latest version of the Fiesta iOS App
- Logged into an active Fiesta account
Before You Start
International Power Requirements
IMPORTANT:
If the Guac Booth was purchased outside of the United States or is intended for use internationally, it’s important to note that the Guac Booth is designed for 120V power.
When using the Guac Booth outside the United States, a step-down converter is required. Failing to use one can result in significant damage to the Guac Booth and potentially the surrounding area.
Learn more about Recommended Guac Accessories and the step-down converter.
Step One
Set Up And Install The Camera
The first step to assembling Guac is to set up and install the camera in the booth.
What you'll need:
- Canon camera
- Guac head
- Canon Battery
- Canon Battery Adapter
- Flash Sync Cable
- Camera Sync Cable
Learn more about the Guac Camera Setup
Step Two
Set Up And Install The iPad
Next, we’ll be installing the iPad and optimizing its settings for the best experience with Guac. This includes how to connect the Guac to the iPad.
Learn more about how to connect to the Guac to the iPad
What you’ll need:
- Supported iPad (see full list of supported iPads for Guac here)
- Guac head (with the camera installed)
- Philips head screwdriver
Note: Do not use power tools when screwing in the faceplate
Step Three
Assemble Guac Booth
With the camera, iPad, and printer completed, it’s time to assemble Guac!
What you’ll need:
- Base plate
- Two poles
- Guac head (with camera and iPad installed)
- Flash
- Reflector
- Umbrella
- 25’ AC power cable
Optional parts:
- Printer USB cable
Learn more about the Guac Assembly
Step Four
Set Up The Guac Dashboard
Everything is installed and assembled. The final step is setting up the Guac Dashboard in the Fiesta iOS App and checking for any available firmware updates.
What you’ll need:
- Fully assembled Guac
- Wi-Fi internet connection
Learn more about checking for firmware updates and the Guac Dashboard
Optional Next Steps
Chips Assembly
The next step is assembling Chips, the printer enclosure designed to work seamlessly with the Guac Booth. Chips protects the printer during events, creates a cleaner setup, and allows for either wired or wireless printing. This step is optional and only applies if Chips was included in the purchase.
Learn more about the Chips Assembly