1. Photobooth Supply Co
  2. Fiesta Software
  3. Event

How To Create A Kardashian Style Glam Booth

Updated

Table Of Contents

Explainer

How To

What To Know

 

 

Explainer
What is a Glam booth?

The photo booth style popularized by the Kardashians is a soft, black and white capture – typically a Photo capture – that is an often-requested guest experience due to its simplicity and classic look.

In the Fiesta Software, you can achieve this look with three simple features and settings adjustments:

  • Face Effects
  • Filters
  • Custom Camera Settings

 

Back to top

How To
Set Up Face Effects

Screenshot 2024-11-15 at 5.26.28 PM.png

  1. Log into the Fiesta app
  2. Select or create an event
  3. Select Configure Event
  4. Select the Effects tab
  5. Toggle on Face Effects
  6. Select Face Effects to open the feature's settings
    • If you are on the Fiesta iOS App, press Select Effects
  7. Select one of the 3 Glam options to activate the feature

Note: As long as only one of the Glam options is enabled, it is recommended to toggle on the Automatically apply face effect to all captures setting

Learn more about Face Effects

 

Back to top

How To
Turn On Mono Filter

Screenshot 2024-11-15 at 5.25.34 PM.png

  1. Log into the Fiesta app
  2. Select an event or create a new event
  3. Select Configure Event
  4. Select the Effects tab
  5. Toggle on Filters
  6. Select Filters to open the feature's settings
  7. Select Mono to enable it for the event

Note: There are two black & white Filter options in the Fiesta Software: Mono and Noir. Noir is not recommended when trying to achieve the Kardashian Style Glam Photo Booth effect due to the high contrast of the filter.

Learn more about Filters

 

Back to top

What To Know
Adjusting Camera Settings

Optionally, you can also adjust the camera settings from the Fiesta iOS App. Setting both the Exposure and White Balance to Manual will help maintain consistency between captures.

 

 

How To
Adjust Camera Settings

  1. Launch the Fiesta iOS App
  2. Select your event
  3. Select Configure Event
  4. Select the Camera tab
  5. Open the Camera Settings dropdown menu to access the settings
  6. Toggle off Auto Exposure
  7. Toggle off Auto White Balance
  8. Adjust the values for Exposure and White Balance to the desired settings

IMPORTANT: You will want to make these adjustments at the event once everything is set up to ensure that the values are set based on the lighting conditions at the event.

Learn more about how to set the White Balance and Exposure 

 

Back to top

 

Articles in this section

See more