Guac & Chips Cable Connections
- Guac Brain USB-C Charging Cable
- Guac Brain Ethernet Cable
- Guac Power Cable
- Guac Belkin Surge Protector
- Guac To Chips Printer USB Cable
- Chips Power Cable
- Guac Flash Power Cable
- Guac Camera To Flash Sync Cable
Guac Camera
- Canon R100 Camera USB Cable
- Canon M50 II Camera USB Cable
- Guac Camera To Flash AS-15 Flash Adapter
- SanDisk 32GB SD Card
Guac Flash
- Godox MS300-V Studio Flash
- Godox AD-R6 Flash Reflector
- Guac Flash Protective Cap
- Guac Flash Tube
- Guac Flash Fuse
- Guac Flash Umbrella
- Godox MS300 Modeling Lamp Bulb
- Guac Flash Pole
Guac Head
- Guac Camera Thumb Screw
- 12.9" iPad Pro Guac Faceplate
- 13" iPad Pro Guac Faceplate
- Guac Faceplate Screws
Guac Poles
Atlas Stand
Miscellaneous
Guac & Chips Cable Connections
Below is a list of all of Photobooth Supply Co.'s official recommendations for replacement cables for Guac & Chips.
Guac Brain USB-C Charging Cable
The USB Cable that connects the USB charger from the Belkin surge protector to the USB hub for charging the iPad installed in Guac.
Where to Purchase:
Guac Brain Ethernet Cable
The Ethernet cable that connects the Guac Brain to the USB hub for printer and LED control.
Where to Purchase:
Guac Power Cable
The cable that connects Guac to a power outlet.
Where to Purchase:
Guac Belkin Surge Protector
Replacement Belkin surge protector used inside Guac to keep Guac and its electrical components safe from power surges.
Where to Purchase:
Guac To Chips Printer USB Cable
Description:
The USB cable that connects Guac to the Chips printer. For the best experience, we recommend using a cable that is at least 10 feet long.
Where to Purchase:
Chips Power Cable
The cable that connects the Chips Printer Platform to a power outlet.
Where to Purchase:
Guac Flash Power Cable
The replacement 2-foot power cable to connect the Godox MS300 or MS300-V to the Guac Belkin surge protector.
Where to Purchase:
Guac Camera To Flash Sync Cable
The 3.5mm male to male Flash PC Sync cable to connect the Nikon AS-15 flash sync adapter on the camera to the Godox MS300 or MS300-V.
Where to Purchase:
Guac Camera
Below is a list of all of Photobooth Supply Co.'s official recommendations for replacement parts for the Guac camera.
Canon R100 Camera USB Cable
The USB cable that connects the Canon R100 to the Guac.
Where to Purchase:
Canon M50 II Camera USB Cable
The USB cable that connects the Canon M50 II to the Guac.
Where to Purchase:
Guac Camera To Flash AS-15 Flash Adapter
The Nikon AS-15 flash adapter connects the Flash Hotshoe on the camera to the Godox MS300 or MS300-V via the flash sync cable.
Where to Purchase:
SanDisk 32GB SD Card
The SD card that is compatible with the Canon M50 II and R100 cameras.
Where to Purchase:
Guac Flash
Below is a list of all of Photobooth Supply Co.'s official recommendations for replacement parts for the Guac Flash.
Godox MS300-V Studio Flash
The Godox MS300-V is the primary light source/flash for the Guac. It is critical to have a functional flash to ensure your Guac captures look their best. With the new and improved LED flash that has replaced the traditional modeling bulb, this unit will not need the modeling bulb replaced as often as traditional flash units. We recommend this unit to replace any flash unit that came with the Guac.
Note: You can use a different model flash with your Guac booth if it supports a camera sync cable. However, we haven’t tested other flashes and can’t provide support for anything outside of the one included with Guac.
Where to Purchase:
Godox AD-R6 Flash Reflector
The replacement Reflector for the Godox MS300 and MS300-V models.
Where to Purchase:
Guac Flash Protective Cap
The replacement protective cap for the Godox MS300 and MS300-V models.
Where to Purchase:
Guac Flash Tube
The replacement flash tube for the Godox MS300 and MS300-V models.
Where to Purchase:
Guac Flash Fuse
The replacement fuse for the Godox MS300 and MS300-V models.
Where to Purchase:
Guac Flash Umbrella
The replacement Flash Umbrella for the Godox MS300 and MS300-V models
Where to Purchase:
Godox MS300 Modeling Lamp Bulb
The replacement modeling lamp bulb for the Godox MS300 model.
Note: The newer Godox Flash unit (the MS300-V) has the modeling light built-in, and no longer requires a separate modeling lightbulb.
Where to Purchase:
Guac Flash Pole
The replacement flash pole for attaching the Godox MS300 and MS300-V models to the Guac Head.
Where to Purchase:
Guac Head
Below is a list of all of Photobooth Supply Co.'s official recommendations for replacement parts for the Guac Head.
Guac Camera Thumb Screw
The screw that secures the camera to the Guac Head using the tripod thread at the base of the Canon M50 II or R100.
Where to Purchase:
12.9" iPad Pro Guac Faceplate
Front cover for Guac Photo Booths that secure 12.9" iPad Pro 3rd - 6th Generation (2018 - 2022) to the Guac Head.
Where to Purchase:
13" iPad Pro Guac Faceplate
Front cover for Guac Photo Booths that secure 12.9" and 13" iPad Pro (3rd Generation and later) to the Guac Head.
Where to Purchase:
Guac Faceplate Screws
The screws that fasten the Faceplate to the Guac Head to secure the iPad, compatible with 12.9" and 13" Guac Faceplates.
Where to Purchase:
Guac Poles
Below is a list of all of Photobooth Supply Co.'s official recommendations for replacement parts for the Guac Poles.
Guac Pole Knob Nut
The nuts found underneath the knobs found within the Guac Head.
Where to Purchase:
Replacement Poles
Connectable poles which attach the Guac Baseplate to the Guac Head.
Where to Purchase:
Atlas Backdrop Stand
Below is a list of all of Photobooth Supply Co.'s official recommendations for replacement parts for the Atlas Backdrop Stand.
Bottom Atlas Stand Pole Screw
These screws attach to the bottom of the Atlas Stand, beneath the feet.
Details
M8-1.25 x 45mm flat head socket cap screws countersunk bolt
Where To Purchase:
IMPORTANT: Any M8-1.25 screw with a length between 30mm and 50mm is compatible with the bottom pole of the Atlas Stand.
Miscellaneous
Below is a list of all of Photobooth Supply Co.'s official recommendations for miscellaneous parts used with Guac & Chips.
Top Button/Home Button Tool
The tool used to click the sleep/wake or Home button to activate Guided Access while the iPad is installed in Guac.
Where to Purchase: