Salsa 2 Stationary Booth Assembly

This article walks through the Salsa 2 Photo Booth assembly process for Stationary Mode in the recommended order. Each section includes a summary of that stage and videos or links to the full detailed instructions.

Before You Start

Before assembling your Salsa 2 Photo Booth, make sure you have:

• Updated to the latest version of iPadOS
• Updated to the latest version of the Fiesta iOS App
• Logged into an active Fiesta account

Don't have a Fiesta account yet? Learn how to create a Fiesta account here.

Install The iPad

1. Remove the Salsa 2 Head from the Salsa 2 Case and lay it facing up on a flat surface
2. Remove the Allen wrench from the case
3. Unscrew the four screws holding the Faceplate in place
4. Remove the Salsa 2 Faceplate
5. Plug the USB-C cable into the iPad
6. Insert the iPad into the Salsa 2 Front Plate
7. Reattach the Faceplate
8. Screw the four screws back in to lock the Faceplate into place
    

Back to top

Walkthrough
Assemble Salsa 2 In Stationary Mode

What you'll need:

• Salsa 2 Case
• Salsa 2 Head
• Salsa 2 Poles
• Salsa 2 Baseplate
• Salsa 2 Power Cable
• Salsa 2 Power Supply
• Salsa 2 AC Extension Cable

IMPORTANT: Use the included power supply and cable, or a power supply and cable rated for at least 100W.

Back to top

Alternate Method
Roamer Assembly

Need a more mobile Salsa 2 setup instead of the standard Stationary assembly? Use the alternate Roamer Assembly method:

• Roamer Assembly

Back to top

Next Steps

After Salsa 2 is assembled, continue with the Fiesta Software setup to prepare for your first event.

• Basic iPad And iPhone Settings
• Events Screen
• How To Create An Event
• Event Support Articles
• Event Configuration Articles

Back to top