Table Of Contents

Explainer

• Printing After An Event

How To

• Print Captures After An Event

What To Know

• FAQ

Explainer
Printing After An Event

Sometimes, during an event, something goes wrong with the printer. It could run out of media, the connection could fail, the Airprint dongle could stop working, or the printer itself stops working. 

In these cases, it is extremely useful to know that captures can still be printed out after the event is over. All captures, as long as they are saved to the Fiesta servers and the event, can be opened and printed out. 

Back to top

How To
Print Captures After An Event

1. Open the Fiesta iOS App
2. Select the event you want to print from
3. Select Configure Event
4. Select the Modes tab
5. Enable Sharing Station to turn it on
6. Tap the back arrow at the top left to return to the Event Dashboard
7. Select Start Event
8. Select Start Sharing Station
9. Select a capture
10. Tap Print

IMPORTANT: Captures may not print correctly if printed from outside of a running event or Sharing Station.

Back to top

What To Know
FAQ

What if I do not want to use the Sharing Station feature?

• If you do not want to use the Sharing Station feature, turning on Gallery Mode and launching the Event will also allow you to access and print captures.

Will this affect my Analytics?

• Analytics recording which captures are accessed may be slightly skewed, however it will be skewed by one view each

Back to top