Table Of Contents

Explainer

• Proper Lighting For The Tortilla

How To

• Light The Tortilla 

What To Know

• Before You Start
• FAQ

Explainer
Proper Lighting For The Tortilla

The Tortilla 360 Booth, unlike other PBSCO booths, does not have built-in lighting. However, that doesn't mean it cannot be lit properly! Using a four-point lighting method, brightly lit, stylish captures are just a few steps away. 

Back to top

What To Know
Before You Start

When getting ready to light your Tortilla Booth, it is important to first set up and make sure you have enough room. The Tortilla Booth needs a Safety Diameter of 13’ (4m) measured from the center of the platform to make sure guests are safely out of range of the arm.

Likewise, lights should be set up no closer than 6” (150mm) from the Safety Diameter.

Back to top

How To
Light The Tortilla

1. Confirm there is enough space around Tortilla and adequate outlets available
2. Set up the four light stands in a square formation around the Tortilla Booth
3. Adjust the brightness of the lights as needed
4. Take test captures to verify there are no intense bright spots or intense shadows

Back to top

What To Know
FAQ

How many lights should be used?

• We highly recommend using at least four (4) stand lights

What lights should I buy?

• We have a full list of recommended accessories for Tortilla available here

How far away should the lights be from Tortilla? 

• The Tortilla has a Safety Diameter of 13' (4m) measured from the center of the platform
• We recommend setting the lights up no closer than 6" to the Safety Diameter

Can I attach lights to Tortilla? 

• We do not recommend attaching string lights or lights without a battery to the Tortilla booth because of the rotating arm
• The Tortilla arm has a strict weight limit of 3lbs total, and the weight of any accessories plus the capture device must not exceed this weight

Back to top