Table Of Contents

Explainer

• Salsa 2 Versatility

How To

• Switch From Roamer To Stationary Mode

What To Know

• Roamer And Stationary Differences
• FAQ

Explainer
Salsa 2 Versatility

The Salsa 2 Booth was designed with versatility in mind. While a stationary booth is nice, most parties are active. Games, conversations, special moments are happening in more places than just in front of the photo booth camera! 

With that thought, the Salsa 2 Booth was built with multiple modes, including a roamer and a stationary mode. These two modes can be switched between in the middle of an event with ease, to make sure as many memories as possible are recorded. 

Back to top

How To
Switch From Roamer To Stationary Mode

1. Set up the Salsa 2 Head vertically 
2. Set the Roamer Hinge position to open
3. Align the Salsa 2 Roamer above and perpendicular to the Salsa 2 Head
   Note: make sure the Hinge Channel is aligned with the Hinge
4. Slowly lower the Salsa 2 Roamer into place
5. Close the Salsa 2 Head
   Note: if the Salsa 2 Head does not fully close, check the Hinge Channel for any debris

Once the Salsa 2 has been converted back into Stationary Mode and the Roamer has been reattached to the Salsa 2 head, you are ready to set up your booth for a more traditional Photo Booth experience - or pack your booth up!

Note: We do not recommend packing and storing the Salsa 2 Roamer and Salsa 2 Head units separately, as it increases the risk of damage for all parts. 

Back to top

What To Know
Roamer And Stationary Differences

The Roamer and Stationary modes serve different purposes. The Stationary mode allows for a more traditional photo booth experience, where guests to come up to the booth and go through the capture process in one stationary location. 

The Roamer mode, however, allows for more interactivity than ever before! This allows you, the Booth owner, to bring the booth to guests, capturing more of the "In The Moment" moments and really brings life to the party. This also allows for the inclusion of guests who wouldn't traditionally interact with the booth, or who couldn't because of mobility or other restraints. It truly is a whole new experience!

Back to top

What To Know
FAQ

Can I switch modes during an event? 

• Yes, it is very easy to switch between Roamer and Stationary mode during an event and encouraged! 

Do I need to power the booth separately in Roamer mode, or does the iPad power the booth?

• The iPad will be able to function on its own battery, however the Roamer will not be powered by the iPad and will need a separate battery to connect to to maintain the fan and LEDs.

Can I throw the Salsa 2 in Roamer mode? 

• We do not advise throwing the Salsa 2 in any available mode, as this could severely damage the booth and iPad.

Can I pack the Roamer and the rest of the Salsa 2 Head separately?

• We do not recommend packing and storing the Salsa 2 Roamer and Salsa 2 Head units separately, as it increases the risk of damage for all parts. 
• We recommend reattaching the Salsa 2 Roamer to the Salsa 2 Head before packing and transporting the booth.

Back to top