Pairing The Salsa LED Ring

Table Of Contents

Before You Start

• iPad Setup and Salsa Booth Assembly

How To

• Pair the LED Ring
• Unpair LED Ring

What To Know

• Troubleshooting the LED Ring
• Customizing the LED Ring

Before You Start

iPad Setup And Salsa Booth Assembly

Before starting:

• Install the iPad into your Salsa Photo Booth
• Enable Bluetooth on the iPad
• Plug your Salsa Photo Booth into power

If you haven’t completed these steps, please refer to these guides:

• Salsa 1 Booth Assembly

Note: Guac does not require pairing to the LED Ring.

Back to top

How To

Pair LED Ring

To pair the LED Ring on the Fiesta iOS App:

1. Log in to the Fiesta iOS App
2. Select an event or create a new event
3. Select Configure Event
4. Select the Interface tab
5. Select the LED Ring dropdown menu to open the LED Ring settings
6. Tap Pair with LED
7. Select a booth to pair with from the list

Note: Salsa 1 Photo Booths will be indicated via the serial number, which will begin with S1 through S5 and follow the pattern:
SX-XXXX-XXXXXX

Salsa 2 Photo Booths serial numbers will begin with S-2 and follow the pattern:
S-2XX-XXXX-XXXXX

Back to top

What To Know

Troubleshoot LED Pairing

If your booth is not appearing or if you receive an error after tapping Pair with LED:

• Check that your Salsa Photo Booth is plugged into power
• Check that your iPad has Bluetooth turned on

If the LED Ring is paired but the lights are not turning on:

• Tap Unpair LED and try pairing again
• Unplug the Salsa Photo Booth from power and plug it back in
• Restart the iPad

Need more help?  Check out the complete Salsa LED Troubleshooting guide here 

Back to top

How To

Unpair LED Ring

You will need to unpair the LED Ring from the iPad before pairing with another device.

To unpair the LED Ring:

1. Log in to the Fiesta iOS App
2. Select an event or create a new event
3. Select Configure Event
4. Select the Interface tab
5. Select the LED Ring dropdown menu to open the LED Ring settings
6. Tap Unpair LED

Note: It is not necessary to unpair the LED Ring after an event

Back to top

What To Know

Customizing LED Ring

The LED Ring can be customized for an event or changed during an event, at any time, from the Fiesta Web App or the Fiesta iOS App.

Changes can be applied to a running event in real-time, as long as the iPad is connected to Wi-Fi and the LED Ring is paired with the Fiesta iOS App.

Learn more about customizing the LED Ring

Back to top

Warning: Do not run the Salsa App and Fiesta Software simultaneously. Doing so will prevent the LEDs from pairing.