Explainer
How To
What To Know
What is the Roamer handle?
The Roamer Handle is the piece attached to the back of the Salsa 2 Roamer, enabling the booth to be used handheld. This allows for a whole new experience with your booth and the Fiesta app - you can now bring the booth to your clients and guests!
Attach The Roamer Handle
- Remove the Salsa 2 Head from the case
- Remove the Roamer Handle from the case
- Open the Salsa 2 Head using the Roamer Release lever
- Align the top of the Roamer handle with the top hole in the back of the Roamer back
- Insert the top of the Roamer handle tilted downward
- Tilt the bottom of the Roamer handle toward the Roamer back and into the bottom hole
- Slide the handle upward to lock the Roamer handle in place
When sliding the handle upward, you should hear a small click. This indicates the handle is locked and the Salsa 2 Roamer is ready to use!
Remove The Roamer Handle
- Open the Salsa 2 Head using the Roamer Release lever
- Grab the Roamer handle
- Under the handle, drag the Handle Release Slider down to unlock the Handle
- Slide the Roamer handle down and lift the bottom of the handle out
-
Pull the Roamer handle gently away from the Salsa Roamer
Note: If there is resistance, lower the handle more before pulling the handle away
Attaching And Removing
The Salsa 2 Roamer handle is designed to be durable and survive drops, falls, and any roughhousing that may happen. However, there are a few things to take note of when attaching, removing, and using the Roamer handle:
- When attaching, make sure there is a click. That indicates the Handle Release Slider has locked into place and the handle is secure.
- When removing, make sure the top handle slot is fully clear before pulling the handle away. The fit is snug, but it should never be necessary to use force when removing the handle!
- The handle must be inserted and removed by tilting. The handle hooks into place along both the top and bottom. If not installed by tilting, the hooked portions will not be properly aligned and the handle will not lock into place.
- The handle can remain attached while the Salsa 2 is in Stationary mode, as the open area inside the Salsa 2 head is large enough to accommodate the Handle.