Before You Start
Before assembling your Salsa 2, make sure that you have:
- Updated to the latest version of iPadOS
- Updated to the latest version of the Fiesta iOS App
- Logged in to an active Fiesta account
Don't have a Fiesta account yet? Learn how to create a Fiesta account here.
Assembly Video
Stationary Assembly
What you'll need:
- Salsa 2 Case
- Salsa 2 Head
- Salsa 2 Poles
- Salsa 2 Baseplate
- Salsa 2 Power Cable
- Salsa 2 Power Supply
- Salsa 2 AC Extension Cable
Assembly Steps
Stationary Assembly
- Remove the Salsa 2 Head front of the Case and place it on the fabric flap of the carrying case
- Remove the Salsa 2 Baseplate from the Case
- Remove the power cords and booth accessories from the case
- Remove the first Salsa 2 Pole from the case
- Run the Salsa 2 Power cord through the bottom of the Baseplate and the first Salsa 2 Pole Cable Conduit
- Fasten the first Salsa 2 Pole to the Baseplate
- Remove the second Salsa 2 Pole from the case
- Run the Salsa 2 Power Cord through the Second Salsa 2 Pole Cable Conduit
- Fasten the second Pole to the first Pole and the Baseplate
- Run the remainder of the Salsa 2 Power Cord through the grommet at the base of the Salsa 2 Neck
- Open the Salsa 2 Head using the Roamer Release Lever
- Connect the Power cord to the USB-C input on the back of the Salsa 2 Roamer
- Connect the Salsa 2 Power Cord to the Power Supply
- Connect the Salsa 2 Power Supply to the AC extension cable
- Plug the AC extension cable into the wall
- Close the Salsa 2 Head
Note: Salsa 2 should be set in a space that measures roughly 10 feet wide by 5 feet deep. Ideally, for the best capture exposure, the booth should be assembled 3 feet from the background, and have at least 2 feet behind it to allow for guest traffic.
Assembly
Other Methods
Working with the Salsa 2 but looking to assemble the booth in a different way? Check these out instead:
- Roamer Assembly
- VESA Assembly ~ Coming Soon!
- Permanent Installation Assembly ~ Coming Soon!
Next Steps
Fiesta Software
After you have assembled your Salsa 2 Photo Booth, check out some of the Fiesta Software links to get ready for your first events here!