Everything you need to know about pairing, customizing, and troubleshooting your LED ring.
Before You Start
How To
What To Know
Before You Start
iPad Setup And Salsa Booth Assembly
Before starting:
- Install the iPad into the Salsa Booth
- Enable Bluetooth on the iPad
- Plug the Salsa Booth into power
If you haven’t completed these steps, please refer to these guides:
Note: Guac does not require pairing to the LED Ring.
How To
To pair the LED Ring with the Fiesta iOS App:
- Log in to the Fiesta iOS App
- Select an event or create a new event
- Select Configure Event
- Click Interface
- Click LED Ring
- Tap Pair with LED
- Select a booth to pair with from the list
Note: The booth will be indicated via the serial number, which will begin with S1 through S4 and follow the pattern:
SX-XXXX-XXXXXX
What To Know
If your booth is not appearing or if you receive an error after tapping Pair with LED:
- Check that the Salsa Booth is plugged into power
- Check that Bluetooth is turned on
If the LED Ring is paired but the lights are not turning on:
- Tap Unpair LED and try pairing again
- Unplug the Salsa Booth from power and plug it back in
- Restart the iPad
Need more help? Check out the complete LED Troubleshooting Steps here
How To
You will need to unpair the LED Ring from the iPad before pairing with another device.
To unpair the LED Ring:
- Log in to the Fiesta iOS App
- Select an event or create a new event
- Select Configure Event
- Click Interface
- Click LED Ring
- Tap Unpair LED
Note: It is not necessary to unpair the LED Ring after an event
What To Know
The LED Ring can be customized for an event or changed during an event, at any time, from the Fiesta Web App and the Fiesta iOS App.
Changes can be applied to a running event in real-time if the iPad is connected to Wi-Fi and the LED Ring is paired with the Fiesta iOS App.
Learn more about customizing the LED Ring
Warning: Do not run the Salsa App and Fiesta Software simultaneously. Doing so will prevent the LEDs from pairing.