Before You Start
Before assembling your Guac Booth, make sure that you have:
- Updated to the latest version of iPadOS
- Updated to the latest version of the Fiesta iOS App
- Logged in to an active Fiesta account
Before You Start
International Power Requirements
IMPORTANT:
If you have purchased the Guac Booth from outside of the United States or if you plan to use the Guac Booth outside of the United States, it is important to understand the Guac Booth is designed for 120V power.
For international use, it is necessary to use a step-down converter. Not doing so can cause severe damage to your Guac Booth and potentially the surrounding area.
You can find the recommended step-down converter here.
Step One
Set Up And Install The Camera
The first step to assembling your booth is to set up and install the camera into Guac.
What you’ll need:
- Canon camera
- Guac Head
- Canon Battery
- Canon Battery Adapter
- Nikon AS-15 Flash Adapter
- Flash Sync Cable
- Camera Sync Cable
Step Two
Set Up And Install The iPad
Next, we’ll be installing the iPad and optimizing its settings for the best experience with Guac.
What you’ll need:
- Supported iPad (see full list of supported iPads for Guac here)
- Guac head (with the camera installed)
- Philips head screwdriver
Step Three
Assemble Chips
With the camera and iPad set up and installed, it’s time to assemble your printer.
What you’ll need:
- DNP DS620a printer
- Printer media box
Step Four
Assemble Guac Booth
With the camera, iPad, and printer completed, it’s time to assemble Guac!
What you’ll need:
- Base plate
- Two poles
- Guac head (with camera and iPad installed)
- Flash
- Reflector
- Umbrella
- 25’ AC power cable
Optional parts:
- Printer USB cable
Step Five
Set Up The Guac & Chips Dashboard
Everything is installed and assembled. There’s just one last step – setting up the Guac Dashboard in the Fiesta iOS App and updating your firmware.
What you’ll need:
- Fully assembled Guac
- Wi-Fi internet connection