Need a replacement part, but not sure where to find it (or even what it’s called 🙋🏻♀️)?
We got you!
Here’s a rundown of small replacement parts for Salsa 1 that you can purchase in just a few clicks!
Power
- DC Extension Cable
- Power Supply
- AC Power Cable
- iPad Charging Cable (USB-C)
- iPad Charging Cable (Lightning)
Salsa Head
Salsa Poles
Salsa Baseplate
Atlas Stand
Miscellaneous
Power
Description
Power cable that connects to the bottom of Salsa 1 Head and Power Supply
Where to Purchase
Power
Description
Power Supply that connects to DC Extension Cable and AC Power Cable
Where to Purchase
Power
Description
AC Cable that connects to Power Supply and wall outlet
Where to Purchase
Power
Description
Used to charge the iPad while inside Salsa 1. Supports the following iPads:
- 12.9” iPad Pro (3rd Generation and later)
- 11” iPad Pro (1st Generation and later)
- iPad Air (4th Generation)
Where to Purchase
Power
iPad Charging Cable (Lightning)
Description
Used to charge the iPad while inside Salsa 1. Supports the following iPads:
- 12.9” iPad Pro (2nd Generation)
- 10.5” iPad Pro
Where to Purchase
Salsa Head
Description
Screws that fasten the Faceplate to the Salsa 1 head unit
Where to Purchase
Salsa Head
Description
Lever used to tighten or loosen the hinge to adjust the tilt of the Salsa 1 head.
Where to Purchase
Salsa Head
Description
Nut to hold the tilt lever into the Salsa 1 hinge
Where to Purchase
Salsa Head
DC Power Connector Retention Nut
Description
Nut to hold the DC Power Connection Port on the bottom of the Salsa 1 head hinge
Where to Purchase
Salsa Head
Description
Knobs on hinge
Where to Purchase
- McMaster
- Amazon (Similar to the original supplier, but of a lower quality. Will function identically)
Salsa Poles
Description
Nuts found underneath hinge knobs and poles
Where to Purchase
Salsa Baseplate
Description
3/4" square 3/8" adhesive feet for the Salsa 1 baseplate
Where to Purchase
Salsa Baseplate
Description
Adhesive to attach baseplate feet
Where to Purchase
Note: The adhesive is to be used in conjunction with the baseplate feet, and will require trimming as they are not pre-cut into squares. Please clean the baseplate thoroughly with a mild solvent before applying.
Atlas Stand
Description
These screws attach to the bottom of the Atlas Stand under the feet.
Details
M8-1.25 x 45mm flat head socket cap screws countersunk bolt
Where to Purchase
Note: Any M8-1.25 screw with a length between 30mm and 50mm is compatible with the bottom pole of the Atlas Stand.
Miscellaneous
Description
Carrying case for Salsa 1
Where to Purchase
Important: The foam inserts included with the original case that shipped with Salsa 1 are custom made. When purchasing a case, ensure that customizable foam is included or purchase foam to keep Salsa 1 secure.
Note: If your Salsa 1 carrying case is damaged or needs replacement parts, you can reach out directly to SKB Cases to submit a request.
Miscellaneous
Description
Tool used to click the sleep/wake or home button to activate Guided Access
Where to Purchase